GUN KOTE 2400 SERIES

Gun Kote is a thin hard coating that will give excellent protection from abrasion. It is not easily worn off like bluing, phosphate or chemically blackened surface treatments, which can leave metal surfaces, bare and unprotected from the elements. Gun Kote does not attract dirt or dust, has excellent impact resistance and can be formulated to meet specific customers needs.

1. Outstanding corrosion protection. Gun Kote will withstand a minimum of 500-hour salt spray tests at 5% salt, however, tests performed for Armscor by the South African Navel Logistics Dept. showed Gun Kote withstanding an equivalent of a 7 year exposure. (tests were performed on Aluminum in a salt spray chamber with 50/50 on/off time at 35 degrees C.)
2. Resistant to chemicals, oils and solvents common to Automotive, Aircraft, Motorcycles and Marine Industries.
3. Helps to cool parts by dissipating heat. Gun Kote will withstand temperatures over 260 degrees C and as low as -84 degrees C.

Gun Kote and its uses:

1. Exterior of weapons (including clips) of all types from handguns to G5 and G6 heavy artillery and bomb casings.
2. Engine blocks and heads to dissipate heat.
3. Engine water jackets and water pumps to act as a barrier between dissimilar metals.
4. Protection from corrosion while helping to transfer heat and coolant.
5. Transmission cases and rear end housings to transfer heat out of the housings and when used with Gear Kote and Engine Gard Oil Treatment will result in an average 35% reduction of heat.
6. Radiators, Oil and Transmission Coolers, to dissipate heat by 8% to 10% faster then bare metal while providing excellent corrosion protection.
7. Brake Calipers, to provide heat dissipation, corrosion protection resulting in longer life.

These are just some of the applications of Gun Kote. You are limited only by your imagination!